NanoAct Actuator Kit

Quick Overview

NanoAct Actuator is what you need for some of the smallest R/C models. This is the actuator that we use on the Micro Butterfly. weight 0.07g Requires Soldering ability and assembly into your model. Includes: 1 pcs NanoAct Coil 2 pcs 1.5 X 0.5mm Neodymium disc magnets The NanoAct actuator is Fully proportional when used with Plantraco Micro9 actuator capable receivers.

Availability: In stock

US$5.39
OR

NanoAct Actuator Kit

More Views

Details

NanoAct Actuator is what you need for some of the smallest R/C models. This is the actuator that we use on the Micro Butterfly. weight 0.07g

Requires Soldering ability and assembly into your model.

Includes:
1 pcs NanoAct Coil
2 pcs 1.5 X 0.5mm Neodymium disc magnets

The NanoAct actuator is Fully proportional when used with Plantraco Micro9 actuator capable receivers.

Actuator Specifications
Weight 0.07g
Resistance 75 Ohms
I.D. 3mm
O.D. 3.8mm
Magnet 2pcs 1.5mm X 0.5mm disc N50
Wire Length approx 12 - 18 cm
Wire Guage 46AWG 0.04mm before coating

Write Your Own Review

You're reviewing: NanoAct Actuator Kit